|
Home >> Textile Humidification
Systems >> Humidification Systems
| Mini
Humidification Plant |
| Mini
Humidification Plant is a mini Central
type Metallic Airwasher plant. It is a compact
, pre-fabricated and factory assembled unit
for the Air Washer part |
|
|
| Capacity
: 10,000 to 40,000 CFM in steps of 5,000
CFM capacities are available. |
| Construction:
The Casing / Chamber is made out
of Sheet Steel, duly spray galvanized
internally (anti corrosive treatment) and
with synthetic enamel paint externally.
All the internal components are identical
to a Central Airwasher Plant. Louvers
and Eliminators are made out of PVC,
Filter of Nylon, Spray Pipes
of GI / PVC and Nozzles of PP/PC.
|
| An
Axial Fan directly coupled to a Motor
is used and installed before the Airwasher
chamber. |
| 20/22/24
G GI Ducting distributes the air through
PVC Diffusers or deflection type
Grilles depending upon the location
of the Ducting. A Pump is placed near the
unit and connected to the Spray set. |
| Civil
works: The unit could be placed
over a Water tank of size 2'-0"(H)
x 6' to 8' (W) x 16'-0" (L). This is
the only civil work involved along with
a small masonry block to position the Pump
and a wall opening for the duct entry into
the department. |
| Location:
Indoor if space is not a criteria. Small
units could also be hung from the roof if
the roof is reinforced to take a load of
approximately 1 Ton. If outdoor, a shaded
area is ideal. |
| Merits: |
- The Unit could be supplied and installed
in a very short period, say within 4
to 6 weeks since, most of the components
are factory assembled and civil work
is minimum.
|
- The unit could be shifted from one
place to another place and this comes
very handy for an emergency requirement.
|
- The air released from this unit is
having the same quality of air as that
of a Central Humidification Plant without
any free water particles.
|
| |
| |
|
|
